|
|
| |
|
|
|
|
|
|
|
AUP 1
Automatic sensor flushing system for one urinal without assembly box, for building into wall � 12 V, 50 Hz.
AUP 2
Automatic sensor flushing system for one urinal with assembly box and spherical valve � 12V, 50 Hz.
AUP 3
DOMINO urinal with built-in sensor flushing system, AUP 3.B � version with battery power supply, does not need electricity supply. It can be used for reconstruction or modernization of sanitary facilities. Assembly requires only connecting and hanging onto a wall.
AUP 8.B
Automatic sensor-controlled flushing system for a urinal with upper water inlet. Power supply 6 V. Assembly without construction work, suitable also for reconstruction. Dimensions 65x95x90 mm.
AUP R
Automatic flushing system for a group of urinals. It is mounted on side walls distant up to 4,5 m. It is recommended for flushing of max. 3 urinals in operations with breaks. It flushes all the urinals simultaneously.
AUP 11
Automatic flushing system for urinal using thermal sensor with self-priming siphon. Flushes only after usage , does not react to people standing or passing by. Power supply 12 V, 50 Hz.
AUP 12
A cantilever urinal with thermal flushing system.
AUP 15
GOLEM urinal with built-in thermal sensor. Self-priming siphon and water connection is placed inside the ceramic body, thus reducing possibility of damage to the urinal. Assembly requires only connecting and hanging onto a wall. After 24 hours inactivity the urinal flushes itself.
AUP 17
FONDO urinal with built-in thermal sensor that flushes only after usage. Assembly consists only of connecting and hanging onto a wall. After 24 hours inactivity the urinal flushes itself.
AUP 18
SPHINX urinal with built-in thermal sensor and self-priming siphon. Siphon can be turned either rearwards or down. Power supply 12 V, 50 Hz.
AUP 19
APOLLO urinal with built-in thermal sensor and self-priming siphon protected against mechanical damage (anti-vandal). Assembly consists only of connecting and hanging onto wall.
AUP 02
Integral stainless steel urinal with temperature flushing system. Because of its resistance to damage the urinal is intended mainly for operations with expected higher loads � e.g. beer houses, highway lay-byes.
AUM 1
Automatic sensor-controlled tap for washbasins with temperature selector. After 120 sec. Of constant sensor cover a spherical valve closes the water inlet. AUM 1.B � version with battery power, AUM 1.E � for through-flow water heater.
AUM 2
Automatic sensor-controlled tap for washbasins with possibility of setting the temperature and flow of water by a rotary lever mixer. Water inlet can be closed by a lever mixer directly on the tap. AUM 2.B � version with battery power supply.
AUM 3
Automatic sensor-controlled tap for washbasins. AUM 3.1 � with simple tap for one water, AUM 3.2 � with simple tap for hot and cold water, AUM 3.TV � with thermostatic valve, AUM 3.E � for through-flow water heater, AUM 3.B � version with battery power supply.
AUM 7
Automatic sensor-controlled tap for washbasins with START/STOP system and rotary arm intended for sinks with two bowls. Temperature and flow of water is set by lever. AUM 7.B � version with battery power supply.
AUM 9
Automatic sensor-controlled tap for washbasins. AUM 9.1 � with simple tap for one water, AUM 9.2 � with simple tap for hot and cold water, AUM 9.TV � with thermostatic valve, AUM 9.E � for through-flow water heater, AUM 9.B � version with battery power supply.
AUM 10
Automatic sensor-controlled tap with thermostat for temperature setting. Water flow can be set directly on the tap. Power supply 12 V or 6 V � AA batteries.
AUM 12
Automatic sensor-controlled tap with rotary arm for washbasin. Power supply 6V. AUM 12.1B � for one water, AUM 12.2B � for hot and cold water.
AUM 13
Stainless steel sensor-controlled tap for washbasin. Up-to-date design and high resistance. The tap is equipped with thermostatic valve for regulation of water temperature. AUM 13.TVB � version with battery power supply.
AUK 1
Integral stainless steel capacity tap surrounded by a pole and with automatic sensibility setting. AUK 1.1B � for one water, AUK 1.2B � for hot and cold water. Battery power supply 6 V.
AUM 4
Superficial sensor-controlled tap in stainless matt finish suitable for reconstruction and possibility of mounting on existing water inlet. AUM 4.B � version with battery power that allows easy exchange of a random tap without construction work. AUM 4.TV � with thermostatic valve.
AUM 5
Automatic sensor-controlled tap in chrome-plated design with thermostatic valve and water flow regulation. When exchanging a random tap there is no need for construction work. Suitable for inlet spacing from 90 to 160. Battery power supply 6 V.
AUM 6
Automatic sensor-controlled tap with Clage 3,5 kW through-flow water heater and non- contact operation. Swift raising of temperature of running water and easy mounting are advantages of the tap.
AUM 8
Wall sensor-controlled tap in flat finish design with rotary tap. Easy mounting on existing water inlet with spacing from 90 to 160 mm. AUM 8.I � for one water with rotary tap, AUM 8.TV � with thermostatic valve, AUM 8.B � version with battery power supply.
AUM 14
Automatic sensor-controlled tap with thermostatic valve and water flow regulation. Battery power supply. Spacing from 90 to 160 mm. AUM 14.BH � with upper round outflow arm, AUM 14.BD � with lower flat outflow arm, AUM 14.BS � with shower outlet.
AUM 01
Stainless steel washbasin with AUM 3 sensor-controlled tap can be supplied in various versions according to the type of tap. Because of its resistance to damage it is intended mainly for operations with an expected higher load, for example in public houses, discotheques and highway lay-byes.
AFO 01
Stainless steel drinking fountain with manual press valve. Water flows only when valve is pressed. Fountain is suitable mainly for schools, sanitary and spa facilities and for outdoor environments.
AFO 02
Stainless steel columned fountain to be placed in an open space. Water flows only when valve is pressed. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle that can be easily dismounted (e.g. before winter).
AUS 1
Automatic sensor-controlled subsurface shower unit for water with pre-set temperature. Shower arms SP 1 (water flow capacity 9 l/min) or SP 2 (water flow capacity 7 l/min) can be ordered separately.
AUS 2
Automatic sensor-controlled subsurface shower unit with thermostatic valve enabling individual setting of water temperature. Power supply 12 V, 50 Hz.
AUS 3
Automatic sensor-controlled surface unit with thermostatic valve and START/STOP system. AUS 3.B � version with battery power supply.
AUZ 3
Sensor-controlled flushing system for WC using pressure water. The stainless steel casing of the system is fitted with a button for manual flushing that can be used, for example, during cleaning. Power supply 12 V, 50 Hz.
AUZ 5
Automatic flushing-system for WC concealed in-wall toilet module with automatic flushing system. Possibility of manual flushing remains. It can be used for random hang wall closets. Power supply 12 V, 50 Hz.
AUZ 01
Stainless steel wall-hung closet without automatics. Can be combined with AUZ 3 automatic flushing system and KZ I or AUZ 5 cantilever systems. Because of its resistance to damage the closet is intended for operations with expected higher loads.
CANTILEVERS
Cantilevers intended for hanging KZ 1 closets, KB 1 bidet bowls and KP 1 urinals. Height and spacing of the anchoring screws is adjustable. Cantilevers are not suitable for plaster board application. It is sufficient for fixing the cantilever to jam it or make some frontal brickwork.
SIEVES TO URINALS
Stainless steel sieves to Golem, Fondo and other urinals. They prevent the dropping of miscellaneous objects (such as butts) into urinals and choking siphons.
ZAC 1/20
Power supply of safety voltage intended for up to 3 devices. Output 20 VA.
ZAC 1/50
Power supply of safety voltage intended for up to 8 devices. Output 50 VA.
Stainless steel accessories of high quality in modern design that comply even with the most demanding requirements. Customers can choose accessories either hanging or recessed onto wall or put onto a horizontal board.
Recessed towel dispenser for folded paper towels with waste receptacle (2007). Intended to be recessed into wall, towel capacity 350 pcs, waste receptacle capacity 7,6 l.
Waste receptacles and towel dispensers are offered individually in various dimensions and designs.
Hanging, vertical liquid soap dispenser (3003), capacity 1,2 l.
Hanging, vertical toilet paper dispenser (4002). Recessed version types are also available.
Paper towel dispenser for multi-fold paper towels (2001).
Soap dispenser (3005), counter top mounted paper towel dispenser (2005) and waste receptacle (1009).
Mirror in stainless steel frame 410 x 510 mm (5001), stainless steel straight handrail 70 cm (5005).
Baby changing station (9002). Suitable for all modern social facilities, accessible to parents with children � restaurants, petrol stations, entertainment and shopping centres. It is equipped with pneumatic mechanism for easy opening. The opened station has dimensions 570 x 920 x 520 mm (height x width x depth), the shut station has a depth of 100 mm. High safety and easy maintenance.
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page